Concrete Column Lifting and Assembly Set AT-FS

• The AT-FS set is designed for safe lifting and quick, precise assembly of columns or slender precast concrete elements equipped with an appropriate load-bearing hole
• The AT-FS set consists of an AT-FB spreader beam, an AT-F pin and an appropriate set of chain slings and handling ropes
• The working spacing of the slings can be adjusted in 25mm increments by appropriately positioning the movable profiles on the load-bearing beam, locked with pins, which allows for precise balancing of the center of gravity of the suspended 
• After being mounted and secured, the transported element can be remotely released from the sling using a maneuvering rope and simple maneuvers by the crane operator to remove the pin from the load-bearing hole
• Two AT-FS sets are required for lifting precast walls and slabs
• Made according to the harmonized standard: BS EN 13155
• Complies with The Supply of Machinery (Safety) Regulations 2008
• Product marking: manufacturer's mark, UKCA marking, load capacity, factory number, year of production

The AT-FS set consists of an AT-FB spreader beam, an AT-F pin and an appropriate set of chain slings and handling rods.
Completing the set, i.e. selecting individual components, should be done taking into account the geometric para- meters of the lifted load.
That is why we do not offer ready-made sets, but we configure the product based on the inquiry submitted by the user, in which the following

● load weight
● diameter and length of the pin hole
● width of the collision elementses
● height of the load above the pin