Automatic clamp for wide concrete blocks AT-SS

• For safe lifting of concrete blocks with widths ranging from 50 to 600 mm and with side surfaces parallel to each other
• The gripper consists of two parts - the upper pressing part and the lower fastening part of the arms, gripping jaws and support feet equipped with linings made of soft material with a high coefficient of friction, protecting the surface of the load from damage or scratching
• The griper is equipped with an automatic lock with a latching mechanism, causing the clamping jaws to alternately close and open during subsequent lifting/lowering cycles, enabling the crane operator to operate the gripper independently
• The gripping range should be adjusted to the width of the load by adjusting the width of the body - adjustment and locking with a central pin with a cotter pin
• The gripper is equipped with a locking mechanism in the open position, enabling safe transport or storage
• Made according to the harmonized standard: BS EN 13155
• Complies with The Supply of Machinery (Safety) Regulations 2008
• Product marking: manufacturer's mark, UKCA marking, load capacity, factory number, year of production

Gripping range depending on pin position:
position 1: 600 ÷ 550 mm
position 2: 550 ÷ 430 mm
position 3: 430 ÷ 330 mm
position 4: 330 ÷ 230 mm
position 5: 230 ÷ 130 mm
position 6: 130 ÷ 50 mm