Elementor section title
Concrete block lifter AT-SR
WLL: 200 kg
Discount for logged-in customers - 5%
FREE SHIPPING FOR ORDERS OVER £300
Elementor section title

- For safe lifting, moving, assembling or dismantling of concrete blocks with parallel side surfaces
- The gripper consists of two clamping jaws equipped with linings made of soft material with a high coefficient of friction, protecting the load surface from damage or scratching
- The gripper has a claw design and can be operated manually by two operators or with a crane, suspending the gripper on a 2-leg chain sling, which is not included as standard equipment
- The gripper is equipped with a locking mechanism in the open position, allowing safe handling or storage
- Made according to the harmonized standard: BS EN 13155
- Complies with The Supply of Machinery (Safety) Regulations 2008
- Product marking: manufacturer's mark, UKCA marking, load capacity, factory number, year of production


| Code | WLL [kg] |
M |
A [mm] |
HR [mm] |
N [mm] |
Mass [kg] |
| AT-SR 0.2 | 200 | 100 - 300 | 381 - 443 | 335 - 774 | 120 | 11,7 |
Product Details
grade FREE SHIPPING FOR ORDERS OVER £300 (UK MAINLAND)
THERE IS A HANDLING CHARGE OF £20 FOR ORDERS UP TO £300
(This is for the preparation of the products for shipment and delivery)
loyalty DISCOUNTS FOR THIS PRODUCT
• 5% discount for logged-in customers
The discount will be automatically applied to your cart. Does not apply to products on sale.* TRANSPORT
The stated lead time depends on the parameters of the device. The delivery time depends on the size and the time needed to manufacture the device. The exact delivery time is determined after the order has been placed. If the lead time needs to be accelerated, we can offer express delivery after prior agreement on delivery and cooperation. For an extra charge, direct transport from the manufacturer's warehouse to the customer's warehouse or to any other location indicated is possible. This helps speeds up delivery times.
In the same category
- ASK ABOUT PRICE
Plate clamp DE-J - horizontal
WLL: 5000 kg/pair
Gripping range: 100 - 250 mm
Drum clamp with lining GB-OP
WLL: 300 kg
Gripping range: 400 - 600 mm
Wire Coil Inner Tong, 4-arm CH-B
WLL: 3000 kg
Gripping range: 500 - 850 mm
Holder for CBP 49 crossing plate HCJ 1300 kg
WLL: 1 300 kg
For CBP 49 crossing plates
Screw clamp for trapezoidal sheets JP-F 200 kg
WLL: 200 kg
Rail pulling clamp HPT
WLL: 10 000 kg
For rails: S49, R50, S54, UIC60
Spool and cable drum lifter GR-M
WLL: 1600 kg
Clamp for precast concrete manhole rings GDA BZ
WLL: 2 100 - 4 000 kg
Rail lifting clamp HPL-A
WLL: 2000 kg
For rails: 60E1, S60 or UIC60
Plate clamp DE-MC - horizontal
WLL: 20 000 kg/pair
Gripping range: 0 - 150 mm
Write your review
Review sent
Your review cannot be sent
Other products you may be interested in
Wire Coil Inner Tong, 3-arm CH-NP
0WLL: 3000 kg
Gripping range: 500 - 850 mm
Wire Coil Inner Tong 3-arm CH-N
WLL: 3000 - 8000 kg
Gripping range: 500 - 950 mm
Wire Coil Inner Tong 3-Arm CH-NI
WLL: 8000 kg
Gripping range: 600 - 960 mm
Wire Coil Inner Tong with guided central tube CH-NS
WLL: 1500 kg
Gripping range: 500 - 850 mm
Wire Coil Inner Tong, 3-arm CH-NP
0WLL: 3000 kg
Gripping range: 500 - 850 mm
Wire Coil Inner Tong 3-arm CH-N
WLL: 3000 - 8000 kg
Gripping range: 500 - 950 mm
Wire Coil Inner Tong 3-Arm CH-NI
WLL: 8000 kg
Gripping range: 600 - 960 mm
Wire Coil Inner Tong with guided central tube CH-NS
WLL: 1500 kg
Gripping range: 500 - 850 mm
WLL: 200 kg
Product Comments
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent