Mobile gantry crane DELTA 100

The gantry crane is designed for lifting, lowering and moving loads located in its working space, which is determined by the length of the bearing beam. The load capacity of the gantry winch is determined for the entire range of work of the bearing beam.

• 2 side stands with adjustable height, foldable
• Adjustable horizontal length of gantry crane
• Crank for height adjustment (to use only without load)
• Chassis with brake and polyurethane tires
• Upper drive beam
• Trolley: manual
• Chain hoist: manual
  
  

  There is a possibility to customize the crane to specific customer requirements.
  Send inquiry on: sales@craneplex.co.uk

Electric hoist gantry cranes are equipped with:

• an electric box with a receiving socket
• spiral cable route
• optional additional electrical socket at the hoist, enabling powering suspended devices, e.g. vacuum grippers with an electric pump
• Chassis - four swivel castors with brakes

Gantry crane DELTA 100 allows for adjustment:

• the height of the support beam
• the height of the driving supports
• the length of the working part of the support beam.

The gantry crane can be folded or disassembled into simple components, making it easier to service, transport or store.

Wheelsets can be optionally equipped with:

• direction lock (every 90 °)
• underrun protection
     

Height adjustment mechanism of the gate beam.

Lifting / lowering with a crank, locking with a screw.

Recommended equipment. Optional:

• electric chain hoist ESW + trolley EWP
  
  

Control:

cassette control ST for ESW+EWP